General Information:
- The filter sponge absorbs dirt and clears the water.
- Suitable for both fresh and salt water.
- Fully submersible and ideal for any aquarium filtration.
- Recommended for aquariums up to 120 litres.
- Filtration 880 litres per hour.
Performance:
- A clogged or dirty intake screen will generally reduce the performance of the pump.
- Hence you must wash away the surrounded debris frequently.
- If less flow is required, adjust the flow control lever.
Maintenance:
- To perform servicing or cleaning of the pump, firstly remove the front cover and the impeller unit.
- Use a small brush to clean the impeller cylinder or you can just wash away the internal debris under running water.
Caution:
- Always disconnect from the electrical socket before performing maintenance work.
- Do not run dry pump.
- Do not lift the pump unit by pulling the wire.
- The power supply cord provided for this appliance cannot be replaced.
- If the pump failed to operate, check the following, check and ensure there is a consistence power supply to the pump.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.